INTOXALOCK: INTERLOCK IGNITION DEVICE
Do I have to perform any maintenance to my device?
Ignition interlock devices devices require calibrations routinely to maintain the integrity of the device in order for it to continue to accurately measure your Breath Alcohol Concentration (BAC). Once installed, your device has to be calibrated every 60 days. Your device will give you a reminder through its LCD display when it comes close to the 60 days for calibration, and will display how days, hours, and minutes are left before your device expires. If you do not get your device calibrated before your device expires, you will not be allowed to start your vehicle until the calibration is done. There will also be a service fee charged for calibrations. Calibration can be done here at MnM Mobile Solutions as well.
What if I'm locked out of my IID?
A lock out is a state-mandated function that will not allow you to start your vehicle. A lockout may occur due to missing a calibration, to many failed start-up attempts, failed rolling retest, or if there is suspicion that the device has been tampered with. If the device displays "lock out" on the LCD screen with only minutes being counted down then you are in temporary lockout and you may start your vehicle with a passing breath sample after the timer expires. If the lock out countdown is in days, then it is a service lockout. In this case you will need to contact Intoxalock at 877-777-5020 to order a new device. Once the countdown on a service lockout is expired, you will not be able to start your vehicle until you have a new device installed, you will also be responsible for all fees.
What happens if I need to perform maintenance on my car?
If your vehicle requires maintenance work done, you must notify Intoxalock of the work being done. You are able to do this through MyAccount under the "Report Vehicle Maintenance" section. If your mechanic has additional questions they may contact Intoxalock at 877-777-5020 and ask to speak with their Service Technical Assistance Network. Please also let your mechanic know that you have an IID installed and provide them with the instruction sheet. It is crucial that maintenance is reported so that if any power interruptions occur or tests are missed, you will not be charged for tampering with your device.
How do I get my IID removed?
Before proceeding to remove your device you must verify you are eligible for removal with the Mandatory Actions Unit or Court. After receiving approval to remove your device, you will need to either email Intoxalock at or go online to MyAccount.Intoxalock.com to request a removal appointment. There will be a service fee charged for removal.
Are Ignition Interlock devices held to any quality standard?
Ignition Interlock Devices meet all of the National Highway Traffic Safety Association requirements and pass rigorous testing from any state they want to be an approved provider for. At Intoxalock, our devices pass even the the toughest state regulations and Intoxalock is currently able to serve customers in all 50 states.
How do I submit a breath sample to my Intoxalock device?
There are two methods of submitting a breath sample, depending on your state requirements. The most common is a simple blow, inhale, and blow again, method. It is like a deep exhale and deep exhale
Is there an app I can download?
Of course, there is an Intoxalock app for both Apple and Android devices, you can click below to download the app to you respective device.